Results 1 to 4 of 4

Thread: a few questions from a newbie

  1. #1
    Inactive Member chug rain's Avatar
    Join Date
    July 16th, 2004
    Posts
    4
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Just today i bought a Bell and Howell Director Series Super 8 Camera (model 1206). Very exciting! I have a few questions:

    1. How many minutes of film will a super 8 film cartridge capture? (this model aceptes ASA speeds of 25 daylight and 40 tungsten)

    2. When i run the camera with the film compartment door open, i noticed the round piece in the center of the compartment was not spining. Is this normal? It seems to me that it should spin. Does it only spin when the film has been loaded?

    Thank for any help you can give me!

  2. #2
    Senior Hostboard Member BolexPlusx's Avatar
    Join Date
    March 30th, 2002
    Posts
    369
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    There are basically two standard frame rates. If you run at 18 frames per second you will get 3 minutes and 20 seconds, if you run at 24 you will get 2 minutes and 30 seconds.

    I have never seen a camera that the cartridge drive does not spin unless the camera has a cartridge installed, but by the same token life deals me surprises almost daily! Does the motor make any sound when you press the trigger?

    <font color="#a62a2a" size="1">[ July 16, 2004 11:24 PM: Message edited by: BolexPlusx ]</font>

  3. #3
    Inactive Member chug rain's Avatar
    Join Date
    July 16th, 2004
    Posts
    4
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Thanks BolexPlusx

    Will the camera start running at the correct speed when i put different speed film in?

    Yes, the motor sounds healthy. The round piece feels realy stiff to spin with my finger. Is there any way to fix it?

    I also thought of another question: what does the filter key do to?

  4. #4
    Inactive Member chug rain's Avatar
    Join Date
    July 16th, 2004
    Posts
    4
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    I just took apart the camera and found that the shaft connecting the motor to the round piece has broken. Bummer!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •